Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Westgate
Garage door installation in Westgate, FL typically runs $700-$2,200 for a standard single or double door, with custom and wood options landing between $1,000 and $2,200. Most jobs in Westgate are code-driven replacements: older ranch homes built in the 1950s through 1970s carry doors that no longer meet Palm Beach County wind-borne debris requirements. Our crews serve Westgate from our Boynton Beach operation, and we schedule most installations within 5-7 business days after the permit clears. If you’re weighing a replacement, call (754) 227-2243 and we’ll walk you through the process in plain terms.
Why Servo Garage Doors Boynton Beach Is Westgate’s Preferred Garage Door Installation Company
Westgate homeowners tend to research before they call. They’ve measured the opening, looked at wind-rating charts, and read the three-star reviews. What they want from us is a documented process, not a sales pitch. That’s why we photograph the existing door and its hardware before quoting anything. Clause 4 of The Haven Standard requires it: you see the failed component or the undersized track before we ask you to spend a dollar. It’s not a gesture. It’s the founding rule Servo was built on in 2015.
Our technicians are background-checked and uniformed, and every job ends the same way: a written photo record of what was found and what was installed. We’ve completed more than 18,000 garage door projects since 2015, every one with a flat, written price delivered before work began. That’s Clause 1 of The Haven Standard, and it applies in Westgate exactly as it applies everywhere else we work. No verbal estimates. No “call for a quote.” The number is on the paper, and the paper is yours before the first tool leaves the truck.
Westgate’s unincorporated status means permit jurisdiction trips up a lot of homeowners. We file through the Palm Beach County Building Division, not a city office, and we confirm the correct path before scheduling anything. That local knowledge has saved Westgate customers weeks of delay. When an out-of-area contractor submits to the wrong department, the clock starts over. We don’t make that mistake here.
Our Garage Door Installation Services in Westgate
We offer full Garage Door Installation across Westgate, from standard replacements on mid-century ranch homes to custom builds that change how the front of the house reads. The services below cover the bulk of what Westgate homeowners ask for.
New Door Installation
A new door in Westgate usually means a wind-rated replacement for a pre-1990s unit that’s been rusting or binding for years. We supply and install steel and aluminum doors with the correct wind-load rating for Palm Beach County’s hurricane corridor. The process includes removing the old door, inspecting the track and spring, and installing a system that balances properly before we leave. Every new door installation includes the photo record and written warranty, so you know exactly what was done.
Single Car Door
Most Westgate homes have a single-car attached garage, and the original doors from the 1950s-1970s are typically non-rated steel or wood with undersized tracks. We replace these with properly sized, wind-rated single doors that handle South Florida humidity and the occasional hurricane threat. If the opening is odd-sized, we measure everything before ordering so the door fits the jamb, not the other way around.
Double Car Door
Double doors are more common on newer additions and some 1970s ranch designs in Westgate. The wider span puts more stress on the torsion spring and track system, which is why we always assess balance and track alignment before we install. A high-cycle spring rated for the heavier wind-rated door matters more here than on a single car door. We quote the whole job, including any track upgrade, before the install date.
Custom Garage Door
Custom work in Westgate leans toward carriage-house styling and wood-look upgrades that raise curb appeal without sacrificing wind rating. We order custom doors in the size, finish, and hardware style that fits the house, then match the opener and spring to the door’s actual weight. A heavier custom door on a 1960s ranch often requires a track and spring upgrade to balance correctly, and we include that in the written scope so there are no mid-job surprises.
Steel Doors
Steel remains the most practical choice for Westgate’s humidity, provided the panel is properly rated and the bottom seal is replaced with it. We install steel doors from Raynor and Clopay with a corrosion-resistant finish, then set the weather seal to keep the afternoon humidity and summer rain out of the garage.
Wood Doors
Wood carriage-house doors look right on Westgate’s mid-century ranch homes, but the humidity here swells untreated wood within a year. We specify and install wood doors built for South Florida’s moisture levels, with proper sealing and jamb clearance, so the door doesn’t bind against the frame by next June. This is a sector where the difference between a door that lasts and one that warps comes down to installation detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Westgate
We install and service all major brands, including Raynor, LiftMaster, Chamberlain, and Genie. Because Westgate’s housing stock skews older, we carry replacement parts that match the original hardware profiles common in 1950s-1970s builds. That keeps turnaround fast when a track or spring needs to match an existing setup rather than a brand-new opening. We don’t ask you to switch brands unless the old hardware can’t safely support the new door.
Common Garage Door Installation Problems We See in Westgate Homes
- Undersized tracks and tired torsion springs on 1950s-1970s ranches. A heavier, wind-rated replacement door often overwhelms the original track and spring. The result is a door that binds halfway up or drops out of balance within weeks. We inspect the complete hardware path before installation, not just the door panel.
- Incorrect permit jurisdiction. Westgate is unincorporated, so permits go through the Palm Beach County Building Division. Out-of-area contractors routinely file with a neighboring city and stall the job for weeks. We’ve seen this delay more Westgate installations than any physical failure.
- Wood door swelling from 70%+ humidity. A premium wood carriage-house door without proper sealing and jamb clearance binds within a year. We account for South Florida moisture in the installation clearances and spec doors built for it.
- Rusted bottom panels and failed weather seals. Decades of humidity and rain exposure corrode bare steel panels and degrade seals, especially on doors that haven’t been maintained. When the bottom panel is gone, the whole door usually goes with it, which is why replacement, not patchwork, dominates Westgate installs.
Pricing for Garage Door Installation in Westgate, FL
Here are the price ranges for the installation work we do most often in Westgate. These aren’t placeholders. They’re the numbers we write on the estimate before any work is scheduled.
| Service | Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Custom Garage Door | $1,200-$2,200 |
| Wood Doors | $1,000-$2,000 |
| Opener Installation | $250-$550 |
| Track Realignment | $120-$240 |
| Spring Repair | $180-$340 |
What moves the number is mostly the door itself: steel vs. wood, standard vs. custom, single vs. double. Track and spring upgrades add cost when the existing hardware can’t safely carry the new door. We quote the flat, written price before any work starts, and that number doesn’t change once we see the opening. Clause 1 of The Haven Standard. Estimates are free, and you keep the written scope regardless of whether you hire us.
We Also Serve Cities Near Westgate
Beyond Westgate, our crews cover Garage Door Installation in Westgate and the neighboring communities of Boynton Beach, Lantana, Delray Beach, and Lake Worth. Most of these areas share the same unincorporated permit path and mid-century housing stock, which means the same local knowledge carries over without a learning curve.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Westgate
Yes. Almost every garage door replacement in Westgate requires a permit pulled through the Palm Beach County Building Division, not a municipal office. We file the permit for you and schedule the inspection after installation. Skipping this step on a code-driven replacement is a fast way to fail a future home sale inspection.
Sometimes, but only if the existing tracks are sized correctly and in good condition. Many 1950s ranch homes in Westgate have undersized tracks that can’t handle a heavier wood door, and installing one anyway leads to balance failure and cable drum slippage within months. We measure the track span and weight rating during the estimate, and if an upgrade is needed, it’s on the written scope before you commit. Call (754) 227-2243 and we’ll tell you what your specific opening can take.
A belt-drive opener from LiftMaster or Genie, sized to the door’s actual weight, is the standard we recommend for custom wood doors in Westgate. The humidity here doesn’t affect the opener much directly, but it does affect the door, and a heavier door needs an opener rated for the load. We match the opener to the door on the written estimate, and we include the high-cycle spring that keeps everything balanced.
Usually not. Most 1950s-1970s ranch homes in Westgate have solid concrete-block garage walls that accept a wind-rated door without structural changes. What often does need changing is the track, the spring, and sometimes the door stop. We check the opening during the free estimate and tell you exactly what’s required before any work is scheduled.
Look for a label or sticker on the inside edge of the door panel that lists a wind-load rating or references Florida Building Code compliance. Most pre-1990s doors in Westgate don’t have one, and if there’s no label, the door is almost certainly non-rated. We photograph the label during our inspection so you have a documented answer, and if it’s not rated, we quote the replacement accordingly.
What a Westgate Installation Looks Like
On a 1960s ranch just off Haverhill Road, our crew replaced a single-car steel door that had rusted through at the bottom panel and had undersized tracks that made the door bind halfway up. We installed a new Clopay wind-rated sectional door with a LiftMaster opener on a high-cycle torsion spring, then realigned the track and added a fresh bottom weather seal to keep out Westgate’s humidity. The permit was processed through Palm Beach County Building Division, and the final inspection passed on the first trip. That’s the process for every Westgate install: inspect, photograph, quote in writing, install, document. No surprises from the first call to the final walkthrough.
Get a Written Price for Your Westgate Garage Door Installation
If you’re in Westgate and replacing a garage door, call (754) 227-2243 for a free estimate. We’ll schedule a measure and inspection, photograph the existing hardware, and deliver a flat, written price with a written scope before any work starts. Every installation closes with a photo record and a written warranty. That’s how we’ve handled 18,000+ doors since 2015, and it’s how we’ll handle yours.
Written by Marcus Deller, Owner at Servo Garage Doors Boynton Beach, serving Westgate, FL.